LEMON Manuals: Even more car manuals for everyone

Installation Procedure

WARNING: This page is about a different car, the 2009 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Rear Generator Bolt & Ground Cable
    GM1669928Courtesy of GENERAL MOTORS CORP.
  1. Position the engine ground cable to the generator.
  2. CAUTION: Refer to Fastener Caution .
  3. Install the rear generator bolt and tighten to 50 N.m (37 lb ft).
  4. Fig 2: Identifying Engine Ground Cable
    GM1664485Courtesy of GENERAL MOTORS CORP.
  5. Install the bolt (1) securing the engine ground cable (2) to the right side body frame rail and tighten to 25 N.m (18 lb ft).
  6. Install the front compartment sight shield. Refer to Front Compartment Sight Shields Replacement .