Circuit/System Testing
- Ignition OFF, disconnect the harness connectors at the BCM.
- Ignition OFF, test for less than 3.0 Ω between the ground circuit terminal 9 X4 and ground.
- If not within the specified range, test the ground circuit for an open/high resistance.
- Ignition On, verify a test lamp illuminates between the B+ circuits listed below and ground.
- Terminal 3 X3
- Terminal 10 X4
- If the test lamp does not illuminate, test the B+ circuits for a short to ground or an open/high resistance.
- If all the circuits test normal, test or replace the BCM.