Installation Procedure
- Install the seat belt guide (1) to the latch assembly, if removed.
- Install the spacer (2) to the latch assembly, if removed.
- Install the seat back latch assembly to the seat frame.
- Attach the recliner cables to the folding mechanism.
- Install the bolts (1, 2) that retain the latch assembly to the seat frame.
Tighten: Tighten the bolts to 45 N.m (33 lb ft).
- Install the screw (3) that retains the latch assembly to the seat frame.
Tighten: Tighten the screw to 25 N.m (18 lb ft).
- Install the seat back cover. Refer to Seat Back Cover and Pad Replacement - Rear (50/50 Split - 60/40 Split) or Seat Back Cover and Pad Replacement - Rear (Bench) .
- Install the armrest, if equipped. Refer to Armrest Replacement - Rear Seat (Bucket) or Armrest Replacement - Rear Seat (60/40 Split) .
- Install the rear seat to the vehicle. Refer to Seat Replacement - Rear No. 1 (60/40 Split) or Seat Replacement - Rear No. 1 (Bucket) .
NOTE:
Refer to Fastener Notice
in Cautions and Notices.