LEMON Manuals: Even more car manuals for everyone

Installation Procedure

    Fig 1: View Of Seat Back Frame Bolts
    GM841683Courtesy of GENERAL MOTORS CORP.
  1. Install the seat back frame.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the bolts (1) and retain the seat back frame to the hinge assembly.

    Tighten:  Tighten the bolts to 53 N.m (39 lb ft).

  4. Install the seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Rear (50/50 Split - 60/40 Split)  or Seat Back Cover and Pad Replacement - Rear (Bench) .