LEMON Manuals: Even more car manuals for everyone

Installation Procedure

    Fig 1: Rear Heated Switch Electrical Connector
    GM752597Courtesy of GENERAL MOTORS CORP.
  1. Install the switch to the console panel.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the retaining screw.

    Tighten:  Tighten the screws to 1.6 N.m (14 lb in).

  4. Connect the electrical connector.
  5. Install the center console end panel. Refer to Center Console End Panel Replacement in Instrument Panel, Gages, and Console.