LEMON Manuals: Even more car manuals for everyone

Installation Procedure

    Fig 1: View of Rear Object Sensor Control Module Assembly
    GM488882Courtesy of GENERAL MOTORS CORP.
  1. Install the rear object sensor control module assembly to the vehicle.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the rear object sensor control module assembly mounting nuts.

    Tighten:  Tighten the rear object sensor control module assembly mounting nuts to 9 N.m (80 lb in).

  4. Fig 2: Unlocking Connector
    GM488881Courtesy of GENERAL MOTORS CORP.
  5. Install the electrical connector. Press in the locking tab.
  6. Install the rear compartment side trim. Refer to Compartment Side Trim Replacement - RH Rear in Body Rear End.