LEMON Manuals: Even more car manuals for everyone

External Ignition Coil (Sealed Module Connector Distributor)

Remove coil connectors and secondary coil wire. In test "A", use high ohmmeter scale. See Fig 1. If continuity is present, replace coil. In test "B", use low ohmmeter scale. Reading should be very low or near zero volts. If not, replace coil. In test "C", use high ohmmeter scale. If there is no continuity, replace coil.

Fig 1: Testing Ignition Coil Resistance External coil system is shown.
G3418