Fixed Spark Mode
- Purpose of test is to verify proper adjustment of spark timing. In this test procedure, the ECM commands a fixed spark advance of 20° and prevents EGR operation under the following conditions: Engine running and warm, code ".9.5" displayed on ECC panel, engine speed below 900 RPM and transmission in "P".
- Procedure may be activated by either of 2 methods. One method is to enter diagnostics and, with code ".7.0" displayed on ECC panel, depress "Instant/Average" button on fuel data panel. Code ".9.5" should appear (if not, refer to code ".7.8" of the switch test). The other method is to depress the "Instant/Average" button on fuel data panel while in Engine Data Display, with parameter ".1.3" displayed.
- As long as the conditions in step 1 are met and the HEI system is working properly (no code "23" or "25" set), a timing light can be used to verify that ignition timing is correctly adjusted. If timing is not 18°-22° BTDC, base timing of 10° BTDC should be adjusted.