Installation Procedure
Position the fuse block (1) to the vehicle and push down until the retainer tabs lock into place.
- Connect all electrical connectors.
Battery Positive Cable (2) - Install
- Battery Positive Cable Nut (1) - Install and tighten 16 N.m (12 lb ft)
Engine Wiring Harness Junction Block Cover (1) - Install
Engine Wiring Harness Junction Block Upper Cover (1) - Install
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection (2.0L LTG)
CAUTION:
Refer to Fastener Caution