Installation Procedure
Position the fuse block (1) to the vehicle and push down until the retainer tabs lock into place.
Battery Positive Cable (2) - Install [2x]
- Battery Positive Cable Nut (1) - Install and tighten [2x] 16 N.m (12 lb ft)
- Connect all electrical connectors.
Engine Wiring Harness Junction Block Cover (1) - Install
Engine Wiring Harness Junction Block Upper Cover (1) - Install
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection (3.6L LGX)
CAUTION:
Refer to Fastener Caution