LEMON Manuals: Even more car manuals for everyone

Removal Procedure

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (without KL9)Battery Negative Cable Disconnection and Connection (with KL9) .
  2. Remove the engine cover. Refer to Refer to Engine Cover Replacement .
  3. Fig 1: Ignition Coil Wiring Harness Connector And Fasteners
    GM2508825Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect the ignition coil wiring harness connector (1).
  5. Remove the 2 ignition coil fasteners (2) from the ignition coil assembly (3).
  6. Fig 2: Ignition Coil Remover/Installer
    GM2579391Courtesy of GENERAL MOTORS COMPANY
  7. Install the EN-6009 remover/installer (1).
  8. Remove the ignition coil (2).
  9. Remove the EN-6009 remover/installer (1).