Installation Procedure
- Install the belt retractor into the T-slot in the center pillar.
- Install the seat belt retractor bolt.
Tighten: Tighten the seat belt retractor bolt to 45 N.m (33 lb ft).
- Install the intermediate guide bolts.
Tighten: Tighten the intermediate guide bolts to 10 N.m (89 lb in).
- Position the guide loop to the guide adjuster bracket.
- Install the guide loop nut.
Tighten: Tighten the guide loop nut to 42 N.m (31 lb ft).
- Install the lower center pillar trim. Refer to CENTER PILLAR LOWER TRIM PANEL REPLACEMENT .
- Install the upper center pillar trim. Refer to CENTER PILLAR UPPER TRIM PANEL REPLACEMENT .
CAUTION:
Refer to Fastener Caution
.