LEMON Manuals: Even more car manuals for everyone

Installation Procedure

  1. Position the rear seat belt retractor in the vehicle.
  2. Fig 1: Locating Rear Seat Belt Retractor Bolt
    GM157291Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
    NOTE: Be sure to seat the alignment tabs.
  3. Install the rear seat belt retractor bolt.

    Tighten:  Tighten the rear seat belt retractor bolt to 68 N.m (50 lb ft).

  4. If installing the center retractor, pass the seat belt through the bezel opening and install the belt bezel.
  5. Return the rear sound barrier to its installed position. Refer to Rear Seat Back Sound Barrier Replacement .
  6. Fig 2: View Of Retractor Anchor Bolt At Floorpan
    GM371958Courtesy of GENERAL MOTORS CORP.
  7. Install the rear seat belt retractor anchor bolt to the floorpan.

    Tighten:  Tighten the rear seat belt retractor bolt to 42 N.m (31 lb ft).

  8. Install the rear window trim panel to its installed position. Refer to REAR WINDOW SHELF TRIM PANEL REPLACEMENT .