LEMON Manuals: Even more car manuals for everyone

Installation Procedure

    Fig 1: Removing/Installing Engine Mounting
    GM667209Courtesy of GENERAL MOTORS CORP.
  1. Insert the front transmission mount stud (long) through the hole in the engine frame.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the nut (1) securing the front transmission mount to the frame.

    Tighten:  Tighten the front transmission mount nut to 70 N.m (52 lb ft).

  5. Lower the vehicle.
  6. Install the front transmission mount bracket. Refer to Transmission Mount Bracket Replacement - Front .