Installation Procedure
- Install the oil pump to the valve body.
- Install the oil pump to valve body bolts.
Tighten: Tighten the valve body bolts to 8 N.m (70 lb in).
- Install the wiring harness, if removed.
- Install the case side cover. Refer to Case Side Cover Replacement .
- Fill the transaxle to the proper level. Refer to Fluid Capacity Specifications .
- Inspect the transaxle fluid level. Refer to Transmission Fluid Checking Procedure .
- Inspect for fluid leaks.
NOTE:
Use a torque wrench to tighten the pump to valve body bolts. Do not exceed the torque specifications.
NOTE:
Refer to Fastener Notice in Cautions and Notices.