LEMON Manuals: Even more car manuals for everyone

Installation Procedure

WARNING: This page is about a different car, the 2005 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Electrical Connectors, Fasteners & Heated Seat Module
    GM430383Courtesy of GENERAL MOTORS CORP.
  1. Position the heated seat module (2) to the bottom of the seat cushion.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the heated seat module fasteners.

    Tighten:  Tighten the fasteners to 2 N.m (18 lb in).

  4. Install the electrical connectors (3) to the heated seat module (2).
  5. Ensure the wiring harness is positioned in the same location in which it was removed.
  6. Install the seat cushion. Refer to Seat Cushion Replacement - Front .
  7. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 7 or SIR Disabling and Enabling Zone 9 in SIR.