LEMON Manuals
: Even more car manuals for everyone
Home
›
Buick
›
2005
›
Park Avenue Base
›
Repair and Diagnosis
›
Engine Performance
›
System
›
Engine Control System - Introduction
›
Repair Instructions
›
Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine/Chassis
›
Installation Procedure
Installation Procedure
Install the EVAP purge pipe into the fuel bundle.
Fig 1: Removing/Installing Evaporative Emission (EVAP) Hoses/Pipes
Courtesy of GENERAL MOTORS CORP.
Install the fuel hose/pipe bundle. Refer to
Fuel Hose/Pipes Replacement - Filter to Engine
.