Installation Procedure
- Install the BPMV bracket (1) to the frame (3).
- Install the 3 BPMV bracket to frame bolts (2).
Tighten: Tighten the 3 bolts to 12 N.m (106 lb in).
- Install the EBCM/BPMV assembly (1) to the BPMV bracket (3).
- Install the 2 BPMV bracket nuts (2).
Tighten: Tighten the 2 nuts to 10 N.m (89 lb in).
- Close the hood.
NOTE:
Refer to Fastener Notice in Cautions and Notices.
IMPORTANT:
Make sure that all 3 rubber isolators are installed on the BPMV. The isolators protect the EBCM/BPMV assembly from vehicle vibrations.