LEMON Manuals: Even more car manuals for everyone

Removal Procedure

    Fig 1: Identifying Output Shaft Differential Carrier & Compression Ring
    GM214826Courtesy of GENERAL MOTORS CORP.
  1. Remove the final drive (700). Refer to Final Drive Replacement .
  2. Using snap ring pliers remove the compression ring (512) from the output shaft.
  3. Remove the left drive axle from the transaxle. Refer to Wheel Drive Shaft Replacement in Wheel Drive Shafts.
  4. Fig 2: Output Shaft
    GM10519Courtesy of GENERAL MOTORS CORP.
  5. Remove the output shaft (510) through the left wheel opening.