Removal Procedure
- Set the park brake and chock the wheels.
Courtesy of GENERAL MOTORS CORP.
- Fully lift the retainer from the transaxle range selector cable mechanism.
Courtesy of GENERAL MOTORS CORP.
- Disconnect the transaxle range selector cable terminal from the transaxle manual shift lever pin.
- Press the locking tabs inward in order to release the transaxle range selector cable from the bracket.
- Remove the left closeout/insulator panel. Refer to Closeout/Insulator Panel Replacement - Left
in Instrument Panel, Gages and Console.
Courtesy of GENERAL MOTORS CORP.
- Remove the retaining clip from the range selector cable.
- Remove the range selector cable from the column control lever.
Courtesy of GENERAL MOTORS CORP.
- Remove the range selector cable from the steering column bracket.
- Remove the range selector cable through the hole in the cowl.