Removal Procedure
Important: Do not attempt repairs in order to correct lock discrepancies. Replace the lock.
- Remove the trim panel. Refer to Trim Panel Replacement - Side Rear Door .
- Remove the water deflector. Refer to Water Deflector Replacement - Rear Door .
- Remove the outside handle rod from the lock.
- Remove the inside handle rods from the handle.
- Remove the clip securing the inside handle rods to the door.
- Remove the door lock screws (1, 2, 3,) securing the lock to the door.
- Remove the lock from the door with the inside handle rods attached to the lock.
- Disconnect the electrical connectors.
- Remove the inside handle rods from the lock.