LEMON Manuals: Even more car manuals for everyone

Installation Procedure

WARNING: This page is about a different car, the 2005 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Throttle Body Air Inlet Screen
    GM180140Courtesy of GENERAL MOTORS CORP.
  1. Install the throttle body air inlet screen (2) into the throttle body (1).
  2. Install the snap ring (3) on to the throttle body (1).
  3. Install the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement .