Diagnostic Aids
Check for:
- Rich Exhaust: If Codes P0131, P0132 or P0134 are present, diagnose these codes prior to Code P0138. An overly rich exhaust may load catalyst causing high HO2S No. 2 signal voltages.
- False rich indication due to silicon contamination of HO2S No. 2. This will be indicated by Code P0138 accompanied by a powdery White deposit on sensor.
- Faulty HO2S No. 2 (Catalyst Monitor): If HO2S No. 2 is internally shorted, HO2S No. 2 voltage displayed on Tech 1 will be greater than 1 volt.
- Intermittent Test: Observe HO2S No. 2 on Tech 1 while moving related connectors and wiring harness with ignition on. If failure is induced, HO2S No. 2 display will change. This may assist in isolating the location of the malfunction.
- Damaged Harness: Inspect PCM harness for a short to voltage in signal circuit.