LEMON Manuals: Even more car manuals for everyone

Temperature Control Cable

  1. Remove glove box. Place temperature lever on control panel at 75. Check if hole in control lever on programmer and hole in programmer chassis line up.
  2. If holes do not line up, disconnect cable at programmer. Line up holes and adjust cable turnbuckle so that cable fits on lever freely (Century and Regal), or bend input link to make proper connection (LeSabre and Estate Wagon). When adjustment is correct, replace glove box.
    Fig 1: Temperature Control Cable Adjustment (Century & Regal)
    G09314894Courtesy of GENERAL MOTORS COMPANY
    Fig 2: Vacuum Hose Schematic (LeSabre & Estate Wagon)
    G09314895Courtesy of GENERAL MOTORS COMPANY
Fig 3: Custom-Aire Wiring Diagram (Century & Regal)
G09314896Courtesy of GENERAL MOTORS COMPANY
Fig 4: Custom-Airs Wiring Diagram (LeSabre & Estate Wagon)
G09314897Courtesy of GENERAL MOTORS COMPANY