LEMON Manuals: Even more car manuals for everyone

7160... Replacing release unit for trailer tow hitch: Notes

NOTE: Bumper trim shown removed for purposes of clarity.

Disconnect plug connection (1).

Unclip cable holder (2).

Fig 1: Identifying Plug Connection And Cable Holder
G04753824Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Tightening torque 71 60 2AZ .

Installation: 

Replace microencapsulated screw (1).

Fig 2: Identifying Microencapsulated Screw
G06852197Courtesy of BMW OF NORTH AMERICA, INC.
NOTE: Shown without gear unit for purposes of clarity.

Fit special tool 72 0 010 so that ribs (2) of retainer (1) are inserted into special tool.

Fig 3: Inserting Ribs Of Retainer Into Special Tool (72 0 010)
G06852198Courtesy of BMW OF NORTH AMERICA, INC.
IMPORTANT: Make sure special tool 72 0 010 is correctly positioned.
Special tool 72 0 010 must be inserted between trailer tow hitch (1) and gear unit (2).
Fig 4: Inserting Special Tool Between Trailer Tow Hitch And Gear Unit
G06852199Courtesy of BMW OF NORTH AMERICA, INC.

Drive special tool 72 0 010 in direction of arrow upwards and remove retainer of gear unit (1).

Detach gear unit (1).

Fig 5: Removing Gear Unit Retainer Using Special Tool (72 0 010)
G06898347Courtesy of BMW OF NORTH AMERICA, INC.

If it is not possible to detach the gear unit:

RELEASE GEAR UNIT .