LEMON Manuals: Even more car manuals for everyone

Removal & Installation

  1. Switch off ignition. Protect brake system against unauthorized actuation.
  2. Unlock plug connection (1) and detach. Detach pressure sensor (2) with special tool 34 5 160. See Fig 1 .
  3. Check sealing surfaces and thread of pressure sensor and of hydraulic unit for damage.
  4. Screw in a new pressure sensor immediately after unscrewing the old pressure sensor and tighten to specification. See TORQUE SPECIFICATIONS  .
  5. Bleed front axle circuit.
  6. Check pressure sensor under pressure for leaks.
  7. Pressure sensor check by DSC system. Turn on ignition and firmly depress brake pedal. Warning lamps must not come on any more.
Fig 1: Unlocking Plug Connection
G00123203Courtesy of BMW OF NORTH AMERICA, INC.