LEMON Manuals: Even more car manuals for everyone

Sector Shaft

  1. Center sector shaft gear in housing and remove shaft.
  2. Check end play of adjusting screw. Head of screw is held in sector shaft by a washer and snap ring. End play between adjusting screw and sector shaft is controlled by thickness of washer. End play should be 0.002" (0.05 mm). Replace washer if necessary with one of correct thickness to obtain desired end play.
    Fig 1: Sector Shaft Adjustment Screw
    G09355931Courtesy of BMW OF NORTH AMERICA, INC.
  3. When installing: Pack splines of shaft with high temperature grease and insert shaft carefully to avoid damaging seals.