OVERVIEW - EVAP SYSTEM, WITH Fuel Tank Leak Detection Module -GX36-
The overview only applies to TFSI vehicles.
- Bolt
- 20 Nm
- Bolt
- 1.8 Nm
- Air Filter
- Removing and Installing. Refer to VENT HOSE WITH AIR FILTER, REMOVING AND INSTALLING .
- Hose Clamp
- Vent Hose
- Fuel Tank Leak Detection Module - GX36-
- Removing and Installing. Refer to Fuel Tank Leak Detection Module -GX36-, REMOVING AND INSTALLING .
- Bleeder Line
- To the EVAP Canister Purge Regulator Valve 1 -N80-
- Bleeder Line
- To the fuel tank
- Hose Clamp
- Ventilation Hose
- To the Fuel Tank Leak Detection Module - GX36-
- Bolt
- 1.8 Nm
- Quantity: 3
- Hose Clamp
- EVAP Canister
- Component location: at the right rear in the wheel housing under the wheel housing liner
- Removing and Installing. Refer to EVAP CANISTER, REMOVING AND INSTALLING .