LEMON Manuals: Even more car manuals for everyone

Contact Corrosion

Contact corrosion can occur if inadequate fasteners (bolts, nuts, washers, etc.) are used.

For this reason, only fasteners with a special surface coating may be installed.

Furthermore, only rubber/plastic parts and adhesive made of electrically non-conductive materials are used.

If there are doubts about whether parts can be used or not, use new parts. Refer to the Parts Information.

NOTE:

Only original replacement parts are recommended. They are checked and are compatible with aluminum.

The use of Audi accessories is recommended.

Contact corrosion damage is not covered under warranty.