Era-GLONASS: Emergency Call Function, Checking (Not For NAR)
Requirements:
- Applies to vehicles with ERA-GLONASS emergency call function (depending on market requirements).
- Services are only possible within the coverage of the mobile network.
- Transport mode deactivated.
- It may take up to 15 minutes between the deactivating transport mode and checking the emergency call function, depending on the system.
- Make sure there is a suitable cell phone connection: park the vehicle outdoors, if necessary.
Procedure:
-- Switch the ignition on.
-- Check if the LED -2- is green.
-- Perform ERA-GLONASS test mode:
-- Press the test button behind the cover in the roof module -1- in the corner next to the emergency call button with a sharp object for three seconds and follow the voice prompt instructions for performing the test procedure.
-- Press the emergency call button after the test procedure in order to initiate the test call.
If the LED is red or the test mode is not possible, then connect the Vehicle Diagnostic Tester (refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING ), and perform Guided Fault Finding "75 - Emergency Call Module, Functions, ERA-GLONASS Operation".
Due to the country-specific regulations do not deliver the vehicle without successful activation of the ERA-GLONASS: emergency call function (red LED).