LEMON Manuals: Even more car manuals for everyone

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Brake Caliper-To-Wheel Bearing Housing Bolt(1) 140 (190)
Drive Axle Collar Bolt
Step 1 140 (190)
Step 2 Additional 180° Turn
Guide Link-To-Subframe Nut & Bolt(1) , (3)
Step 1 66 (90)
Step 2 Additional 90° Turn
Guide Link Ball Joint Nut(1) 74 (100)
Mounting Bracket-To-Body Nut 74 (100)
Stabilizer Bar-To-Subframe Bracket Nut 15 (20)
Stabilizer Bar Coupling Link Nut (With Ball Joint)(1) , (4)
To-Track Control Link (Step 1) 30 (40)
To-Track Control Link (Step 2) Additional 90° Turn
To-Stabilizer Bar 66 (90)
Stabilizer Bar Coupling Link Nut (With Rubber Bushings)(1) , , (3) , (4)
To-Track Control Link (Step 1) 30 (40)
To-Track Control Link (Step 2) Additional 90° Turn
To-Stabilizer Bar 44 (60)
Steering Tie Rod End-To-Wheel Bearing Housing Nut(1) 33 (45)
Strut Piston Rod Nut(1) 37 (50)
Strut-To-Mounting Bracket Nut 15 (20)
Strut-To-Track Control Link (3) 66 (90)
Subframe Bolt(1)
Step 1 111 (150)
Step 2 Additional 90° Turn
Subframe Support Plate Bolt 18 (25)
Track Control Link Ball Joint Nut(1) (5) 92 (125)
Track Control Link Ball Joint Nut(1) (6) 74 (100)
Track Control Link-To-Subframe Nut(1) , (3)
Step 1 66 (90)
Step 2 Additional 90° Turn
Transmission Mounting Bolt 30 (40)
Upper Control Arm-To-Mounting Bracket Nut (3)
Step 1 37 (50)
Step 2 Additional 90° Turn
Upper Control Arm-To-Wheel Bearing Housing Nut(1) (7) 30 (40)
Wheel Bearing-To-Aluminum Wheel Bearing Housing(1)
Step 1 59 (80)
Step 2 Additional 90° Turn
Wheel Lug Bolt 89 (120)
INCH Lbs. (N.m) 
Brake Backing Plate Bolt 89 (10)
Steering Tie Rod Hex Bolt 62 (7)
(1) Always replace with NEW fastener. Always replace self-locking nuts.
(2) Connecting link with ball joints up to mid-year 1999. Connecting link with bonded rubber bushing from mid-year 1999.
(3) Since bonded rubber bushings can only be turned to a limited extent, tighten all bolts and nuts to specification. Parts that have bonded rubber bushing should be torqued only when vehicle is standing on ground at curb height.
(4) There are two version of stabilizer bar coupling links. See Figure and Figure .
(5) On models with an aluminum wheel bearing housing.
(6) On models with steel wheel bearing housing.
(7) While tightening, press upper links into wheel bearing housing.