LEMON Manuals: Even more car manuals for everyone

Mechanical Inspection: Compression

WARNING: This page is about a different car, the 1996 Audi Cabriolet. However, it is still accessible from the selected car via links, so may be relevant.

Check engine mechanical condition with a compression gauge, vacuum gauge, or an engine analyzer. See engine analyzer manual for specific instructions.

WARNING: DO NOT  use ignition switch during compression tests on fuel injected vehicles. Use a remote starter to crank engine. Fuel injectors on many models are triggered by ignition switch during cranking mode, which can create a fire hazard or contaminate the engine's oiling system.
COMPRESSION SPECIFICATIONS

Application Specification
Compression Pressure
Normal 131-203 psi (9.0-14.0 bar)
Minimum 109 psi (7.5 bar)
Maximum Variation Between Cylinders 44 psi (3.0 bar)