Drive Belt Inspection
WARNING: This page is about a different car, the 1996 Audi Cabriolet. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
DO NOT install drive belt in opposite direction. Damage to belt may occur.
- Remove drive belt guard. Using a 15-mm wrench, rotate tensioner clockwise to loosen belt tensioner. Secure belt tensioner using Drift (3204). See Fig 2 .
- Remove drive belt. Ensure belt has no splits, cracks or other damage. Replace drive belt if necessary. To install, reverse removal procedure. Install drive belt onto tensioning pulley last. Using a 15-mm wrench, hold tensioner and remove drift. Allow tensioner to move against drive belt. Install drive belt guard.