Clutch Assembly: Inspection
- Check flywheel for burn marks, grooves and excessive dowel pin wear. If necessary, remove and resurface flywheel, and replace dowel pins.
- Check clutch pressure plate for burn marks and grooves. Using a straightedge and blade-type feeler gauge, measure inward taper of pressure plate surface. Maximum taper is 0.012" (0.3 mm). Check for grooves on diaphragm spring ends. Maximum groove depth is 0.012" (0.3 mm). Replace if necessary.
- Check clutch disc for excessive wear, loose rivets, worn springs and oil contamination. Measure clutch disc runout using dial indicator with disc mounted on arbor between centers. Measure runout 0.98" (2.5 mm) from outer edge of clutch disc. Maximum runout is 0.019" (0.5 mm). Replace clutch disc if necessary.