LEMON Manuals: Even more car manuals for everyone

Clutch Assembly: Inspection

  1. Check contact surface area of clutch diaphragm spring fingers and release bearing for scores or wear. Pressure plate may be used if scores do not exceed .012" (.30 mm) in depth. Check pressure plate for cracks, burn marks and scoring.
  2. Replace pressure plate if rivets are damaged or loose inward taper of disc contact face exceeds .012" (.30 mm). Measure runout at outer edge. Maximum runout of clutch disc face is .020" (.50 mm). Check disc splines for wear and rivets for tightness.