Pilot Bearing
- Lock flywheel in place, using Flywheel Holding Tool (10-201 ) or equivalent, on all engines to prevent rotation. On 4 & 5-cylinder gas engines and 4-cylinder diesel engine, install Pilot Bearing Remover Tool (10-202 ) or equivalent. Remove bearing.
- Install pilot bearing with letters on bearing face out, using Pilot Bearing Installer Tool (VW 207c ) for 4-cylinder gas and diesel engines. Use Pilot Bearing Installer Tool (2026 ) or equivalent, for 5-cylinder engine.
- Seat bearing until distance from flywheel recess to bushing edge is 1/16" (1.5 mm) for 4-cylinder gas and diesel engines and 7/32" (5.5 mm) for 5-cylinder engine. Lubricate bearing, complete clutch and/or transmission repair.