LEMON Manuals: Even more car manuals for everyone

Removal & Installation: Fox: Removal

  1. Pull off steering wheel horn control by hand. Disconnect ground wire at horn button. Remove steering wheel mounting nut and pull off steering wheel. Unscrew switch base cap and disconnect plugs at both lever switches and horn contact ring.
  2. Remove upper and lower instrument panel trim from around column. Unscrew bearing flange at bottom of steering column. Remove steering shaft-to-pinion pinch bolt (in engine compartment), pry off clip, and drive steering column off pinion (use a brass mandrel).
  3. Remove upper instrument panel trim to make shear screws accessible.
    NOTE: These screws are also upper steering column support screws.

    Drill off heads of shear screws. Remove steering lock and allow to hang by wiring. Remove steering column.