Throttle Body Component Inspection
Test Procedure
- Preparation
-
- -
Throttle body connector (6P): disconnected
- -
- Procedure
-
- -
Perform the inspection according to the following table.
- -
(Disconnected)Throttle body connector (6P)male terminals
IG Mode
Normal Conditions
Throttle body internal circuit inspection
OFF
About 1.2 Ohm - 1.0 kOhm
OFF*1
Not shorted
OFF*1
Not shorted
*1: The throttle body is installed to the vehicle.
Results
- If it is abnormal, there is a problem with the throttle body.