Brake Booster Vacuum Line Inspection
Test Procedure
- Procedure
-
- Start the engine.
- Adjust the HDS [BRAKE BOOSTER PRESSURE SENSOR (A)] value with accelerator pedal operation to 66.7 kPa (500 mmHg, 19.7 in Hg).
- Turn the vehicle to the OFF (LOCK) mode, and wait for 30 seconds.
- Turn the vehicle to the ON mode.
- Confirm the HDS [BRAKE BOOSTER PRESSURE SENSOR (A)] value.
- Normal Conditions
-
- -
HDS [BRAKE BOOSTER PRESSURE SENSOR (A)] value does not change 2.7 kPa (20 mmHg, 0.8 in Hg) or more.
- -
Results
- If it is abnormal, there is a problem with the brake booster vacuum line.