DTC U0199: Immobilizer-keyless Control Unit Lost Communication with Door Multiplex Control Unit
NOTE:
If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A (see
TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A
)
- Clear the DTCs with the HDS
- Turn the ignition switch to LOCK (0) and then back to ON (II)
- Wait for at least 6 seconds
- Check for DTCs with the HDS
Is DTC U0199 indicated?
YES -Go to the door multiplex control unit input test, and do all power, ground, and communication input tests (see POWER WINDOW MASTER SWITCH INPUT TEST ) If the tests prove OK, replace the power window master switch (see REAR POWER WINDOW SWITCH TEST )
NO -Intermittent failure, the system is OK at this time Check for loose or poor connections at the door multiplex control unit and the related units