LEMON Manuals: Even more car manuals for everyone

Remote Registration and Reprogramming for Keyless Access System and Immobilizer System: Registration

  1. Turn the ignition switch to ON (II) with the built-in key.
  2. Connect the HDS to the data link connector.
  3. Select KEYLESS ACCESS or IMMOBILIZER (depending on the part replaced)* from the SYSTEM SELECT menu.

    *: If registering the imoes unit, select IMMOBILIZER from the menu. (This is not necessary to register as a keyless access composed part.)

  4. Enter TEST MODE menu, then select suitable menu from the HDS indications.