LEMON Manuals: Even more car manuals for everyone

Water Pump Inspection

  1. Remove the drive belt (see DRIVE BELT REPLACEMENT ).
  2. Turn the water pump pulley counterclockwise. Check that it turns freely. If it doesn't turn smoothly, replace the water pump (see WATER PUMP REPLACEMENT  ).
    NOTE: When you check the water pump, you may see a small amount of "weeping" from the bleed holes (A). This is normal.
    Fig 1: Identifying Water Pump Pulley Holes
    G06264413Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the drive belt (see DRIVE BELT REPLACEMENT ).