LEMON Manuals: Even more car manuals for everyone

Radiator Cap Test

  1. Remove the radiator cap (A), wet the seal with engine coolant, then install it on the pressure tester (B) (commercially available).
    Fig 1: Removing Radiator Cap
    G06264409Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Apply a pressure of 93-123 kPa (0.95-1.25 kgf/cm2 , 14-18 psi).
  3. Check for a drop in pressure.
  4. If the pressure drops, replace the cap.