Removal and Installation: Removal
- Make sure you have the anti-theft codes for the audio system and the navigation system (if equipped). Make sure the ignition switch is OFF.
- Disconnect the battery negative cable, then disconnect the positive cable, and wait at least 3 minutes.
- Remove the screws (A) from the alternator and battery cable terminals.
- Remove the two mounting bolts (B) from the under-hood fuse/relay box.
- Remove the under cover from the under-hood fuse/ relay box.
- Disconnect the connectors from the under-hood fuse/relay box.
- If replacing the fuse/relay box, carefully remove the relays by prying under the base of the relay.NOTE: Do not use pliers to remove the relays.